PLASTI-KOTE INC (TEMPO PRODUCTS CO) -- 15 ENAMEL -- 8010-00F047735
===================== Product Identification ===================== Product ID:15 ENAMEL MSDS Date:04/24/1995 FSC:8010 NIIN:00F047735 === Responsible Party === Company Name:PLASTI-KOTE INC (TEMPO PRODUCTS CO) Address:1000 LAKE RD City:MEDINA State:OH ZIP:44256-5000 Country:US Info Phone Num:216-725-4511 Emergency Phone Num:216-725-4511 CAGE:EO706 === Contractor Identification === Company Name:PLASTI-KOTE INC (TEMPO PRODUCTS CO) Address:1000 LAKE RD City:MEDINA State:OH ZIP:44256-5000 Country:US Phone:216-725-4511 CAGE:EO706 Company Name:TEMPO PRODUCTS CO A PLASTI-KOTE CO INC Address:1000 LAKE ROAD Box:City:MEDINA State:OH ZIP:44256 Country:US Phone:330-725-4511 CAGE:07708 ============= Composition/Information on Ingredients ============= Ingred Name:ACETONE; DIMETHYL KETONE; 2-PROPANONE CAS:67-64-1 RTECS #:AL3150000 Fraction by Wt: 32-40% OSHA PEL:2400 MG/CUM ACGIH TLV:750 PPM EPA Rpt Qty:5000 LBS DOT Rpt Qty:5000 LBS Ingred Name:ETHANOL (ETHYL ALCOHOL), TECSOL, ALCOHOL, SYNASOL CAS:64-17-5 RTECS #:KQ6300000 Fraction by Wt: 5-10% Other REC Limits:1900 MG/CUM OSHA PEL:1000 PPM ACGIH TLV:1000 PPM Ingred Name:ETHYL 3-ETHOXYPROPIONATE, PROPANOIC ACID, 3-ETHOXY-, ETHYL ESTER *96-1* CAS:763-69-9 RTECS #:UF3325000 Fraction by Wt: 5-10% Ingred Name:ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL CARBINOL CAS:67-63-0 RTECS #:NT8050000 Fraction by Wt: 0-5% Other REC Limits:400 PPM OSHA PEL:400 PPM ACGIH TLV:400 PPM Ingred Name:2-BUTANONE (METHYL ETHYL KETONE) (MEK) CAS:78-93-3 RTECS #:EL6475000 Fraction by Wt: 0-5% Other REC Limits:590 MG/CUM OSHA PEL:200 PPM ACGIH TLV:590 MG/CUM EPA Rpt Qty:5000 LBS DOT Rpt Qty:5000 LBS Ingred Name:XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *96-1* CAS:1330-20-7 RTECS #:ZE2100000 Fraction by Wt: 5-10% Other REC Limits:100 PPM OSHA PEL:100 PPM ACGIH TLV:100 PPM, SKIN EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS Ingred Name:HYDROCARBON PROPELLANT, PETROLEUM GASES LIQUIFIED SWEETENED, C3-7 *96-1* CAS:68476-86-8 Fraction by Wt: 23% ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:INHALATION: NASAL & RESPIRATORY IRRITATION, ASPHYXIATION. EYES: SEVERE IRRITATION. INGESTION: GI IRRITATION. SKIN: IRRITATION. REPEATED/PROLONGED OVEREXPOSURE TO SOLVENTS MAY CAUSE PERMANENT BRAIN & N ERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING & INHALING THE CONTENTS MAY BE HARMFUL/FATAL. Explanation of Carcinogenicity:NONE Effects of Overexposure:IRRITATION, DIZZINESS, WEAKNESS, FATIGUE, NAUSEA, HEADACHE, UNCONSCIOUSNESS, REDNESS, TEARING, BLURRED VISION, VOMITING, DIARRHEA. Medical Cond Aggravated by Exposure:RESPIRATORY &/SKIN REACTION. ======================= First Aid Measures ======================= First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF NEEDED. EYES: FLUSH W/WATER FOR 15 MINS. INGESTION: DON'T INDUCE VOMITING. ASPIRATION HAZARD. KEEP WARM & QUIET. SKIN: WASH W/SOAP & WATER/VARIOUS H AND CLEANERS & WASH CLOTHING. OBTAIN MEDICAL ATTENTION IN ALL CASES. ===================== Fire Fighting Measures ===================== Flash Point Method:TCC Flash Point:0F Lower Limits:1 Extinguishing Media:ALCOHOL FOAM, CO2, DRY CHEMICAL. Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE, BUT MAY BE USED TO COOL CONTAINERS. IF WATER IS USED, FOG NOZZLES ARE PREFERABLE. (SEE SUPP) Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE &/AUTOIGNITE WHEN EXPOSED TO EXTREME HEAT. VAPORS ARE >THAN AIR & MAY TRAVEL ALONG GROUND/BE MOVED & IGNITED BY IGNITION SOURCES. ================== Accidental Release Measures ================== Spill Release Procedures:ELIMINATE IGNITION SOURCES. VENTILATE AREA. ABSORB ON PAPER, VERMICULITE, FLOOR/OTHER MATERIAL & TRANSFER TO A CLOSED CONTAINER. ====================== Handling and Storage ====================== Handling and Storage Precautions:DON'T PUNCTURE/INCINERATE. DON'T STORE >120F/IN DIRECT SUNLIGHT, ON/NEAR HEAT/FLAMES. Other Precautions:STORE LARGE QUANTITIES IN BUILDING PROTECTED FOR STORAGE OF FLAMMABLE LIQUIDS. AVOID BREATHING VAPORS/SPRAY MIST, OPEN WINDOWS & DOORS/USE OTHER MEANS TO ENSURE FRESH AIR ENTRY DURING APPLICATION & DR YING. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:FOR CASUAL/OCCASIONAL USE: WEAR NIOSH/MSHA RESPIRATOR/LEAVE THE AREA. Ventilation:FOR REGULAR/CONTINOUS USE: MECHANICAL (GENERAL) &/LOCAL EXHAUST TO MAINTAIN EXPOSURE BELOW TLVS. Protective Gloves:CHEMICAL RESISTANT, NEOPRENE Eye Protection:CHEMICAL SPLASH GOGGLES Supplemental Safety and Health ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:133-331F Melt/Freeze Pt:M.P/F.P Text:>1500F Vapor Density:>1 Spec Gravity:<1 Evaporation Rate & Reference:SLOWER THAN ETHER Solubility in Water:SLIGHT TO MODERATE Appearance and Odor:TYPICAL SOLVENT PAINT. Percent Volatiles by Volume:80-90 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZING AGENTS. Stability Condition to Avoid:HEAT, OPEN FLAME & OTHER IGNITION SOURCES. Hazardous Decomposition Products:BURNED: CO, CO2, VARIOUS HYDROCARBONS, NITROGEN COMPOUNDS. ==================== Disposal Considerations ==================== Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAY BE DEPOSITED IN A POSTED TOXIC SUBSTANCE LANDFILL IAW/FEDERAL, STATE & LOCAL REGULATIONS. UN1950. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.